Corrosion resistance SS stainless steel filter bag cage

Product Description Features Specifications: Bag Cage For Dust-collector

Advantage:
A) no corrosion

B) no damage

C) 3-5 times longer life than other bag Cage with steel

D) economical maintenance(almost no Maintenance required)

E) prominent effect in removing dust from Filter by pulsing

F) easy to install

G) no ventury installation required Application: Dust from factory of mine, wood, Cement, chemical, medicine, dying,

Paint, plastic, food & other industry

About filter cage:(Specification for Special Cages)

For sepcial cages following dimensions are needed:  (mm)

NOTE： 1."D" stand for the diameter of vertical wire:"Y" stands for quantity of the vertical wire. 2."N" stand for the space of the adjacent horigontal ring: "X" stands for quantity of the space.

Round Style	Diameter	Bag Diameter	Length
	115	120	2000,2400 2800, 3200 3600 4000 4400 4800 5200 5600 　　 6000
	125	130
	147	152
	195	200
Flat Style	Perimeter	Bag Perimeter	Length
	800	800	2000 3000 4000 5000  6000
	900	900
Envelope Style	Length Width Thickness		Bag Length Width Thickness
	1500X750x25		1500X750x25

Detailed Images
Each cage can fit to the requirements of being light, handy, smooth and straight. Cage resembles the rib of bag. It should be light, handy, easy to install, maintain. And it is smooth and straight, to prevent the bag from damage.

Packing & Delivery

Our Service Our company stands for the following core values:

- 100% reliability in delivery, quantity and quality

- Global presence with production resources close to the customer

- Flexible manufacturing from prototype to mass production

- Technical support over the full life cycle of the product

- Efficient manufacturing and logistics solutions

- Collaboration with suppliers from component to complete solution

- Operational control according to ISO 9001:2000 and ISO 14001:2004

- Personnel policy to develop the capabilities of our staff

- Company development by long-term approach

FAQ Bag Cage Install and Storage Requirements   • Before installing filter bags the tube sheet must be checked to ensure that it is clean, there are no sharp edges and there is no debris that could eventually fall into the filter bags  

• The installation procedure is normally decided on site and is dependant upon the number of personnel being used and the available access. Normally it is wise to work compartment by compartment first fitting all the filter bags.  

• The filter bags fitting is simple via a snap band, no tools are required. The filter bag is lowered into the corresponding tube sheet hole and the top seal is made by forming a kidney shape in the snap band top and then releasing this into the tube sheet hole. The groove in the filter bag should fit tightly into the tube sheet forming a seal. 

• This is repeated until all the filter bags have been fitted. 

• Before lowering the cages into the filter bags boards or heavy cardboard should be placed over the bags to protect the filter bags and prevent them being stepped on. If the bags are stepped on they can loose the seal and cause dust emissions at a later date. 

• During the installation of the cages care should be taken not to damage or bend the cages. No damaged, badly bent or corroded cages should be fitted into the filter bags.  

• After all cages have been fitted, an inspection from the inside of the hoppers must be carried out to ensure that all the bags and cages are the correct dimensions and positions.  

Important rules for storing filter bags and cages.  • Store the filter bags and support cages in their original packaging.  

• The filter bags and support cages must be stored in a dry area.  

• Keep the filter bags away from all types of fungi, micro-organisms and insects.  

• Protect the filter bags from rodents or other pests.  

Grupos de Producto : Colector de polvo > Dust Bag Cage